Skip to main content

How to Weigh an RV by Axle for Safe, Even Tire Wear

Your RV can be under its gross weight rating and still overload an axle or a tire. Here's how to weigh each axle at a CAT Scale, read the ticket against your ratings, and set tire pressure from real axle weights.

How to Weigh an RV by Axle for Safe, Even Tire Wear

Quick Summary

To weigh an RV by axle, load it exactly as you travel and pull onto a certified CAT Scale with each axle on its own platform, then compare each axle reading to the GAWR on your door jamb label and the tire load rating. For a towable, make a second pass with the truck alone to calculate true tongue or pin weight.

  • Load the RV exactly as you travel, including water, fuel, gear, and passengers, before weighing.
  • If any axle straddles two platforms, the ticket splits that weight and your numbers are useless.
  • A platform scale reports weight per axle, not per tire, so duals can hide an overloaded side.
  • Aim for roughly 60% of trailer cargo ahead of the axles and 40% behind.
  • Set tire pressure from the tire maker's load and inflation table, not the sidewall maximum.

Why Axle Weights Matter More Than the Gross Number

If you want to know how to weigh an RV by axle, start with this: the gross weight on your door sticker tells you almost nothing about whether your tires are safe. Your rig can sit under its gross vehicle weight rating and still overload one axle or one tire.

A rear axle carrying too much weight can wear its inner duals fast. A lightly loaded front axle can make steering feel vague. Neither problem shows up on a single gross weight ticket.

RV weighing is the process of measuring the load carried by each axle, and ideally each wheel position, so you can compare those numbers to the ratings printed on your tires and your rig's certification label. Here is the whole procedure, step by step.

How to Weigh Your RV at a CAT Scale

A CAT Scale is a certified, automated truck scale found at many travel centers. You pull on, press the call button, and a weight ticket prints once all axles are on separate platforms. The ticket gives you a steer axle, drive axle, and trailer axle reading in one pass. That is the workhorse tool for RV weighing, and it is the same platform the semis use along I-70 and I-71.

Prepping the Rig Before You Pull Onto the Platform

Load the RV exactly as you travel: water, fuel, food, gear, passengers. A half-empty rig gives you a weight you will never actually run.

  • Fill the fresh water tank to your normal travel level
  • Keep fuel tanks at the level you usually drive with
  • Have everyone who rides with you sit in their seats
  • Check tire pressures cold, before you drive to the scale
  • Leave the hitch and weight-distribution bars set the way you tow

Match the Passes to Your Rig

A single pass works for many setups. Some configurations need two or three. Use this decision guide before you leave the driveway.

Class A or Class C motorhome (no towed vehicle): One pass. Steer axle on the first platform, drive axle on the second.

Travel trailer with a tow vehicle: Two passes. Pass one is the full rig hitched, with the truck's steer axle, truck's drive axle, and trailer axles each on their own platform. Pass two is the truck alone, unhitched, so you can subtract the solo truck weight from the hitched drive-axle reading to get true tongue weight.

Fifth wheel: Same two-pass approach as a travel trailer. The pin weight lands on the truck's rear axle, so the hitched drive-axle reading is the number to watch against your rear GAWR.

Tag-axle motorhome: Three platforms minimum, steer, drive, and tag. Some tag axles can be lifted or unloaded with a switch; weigh it in the position you actually drive in, and note that a lifted tag shifts its share onto the drive axle.

Watch out: if any axle straddles two platforms, the ticket splits that weight across both readings and your numbers are useless. Pull forward or back until each axle sits cleanly on one pad.

The Step-by-Step Pass

  1. Pull onto the scale slowly and stop with each axle on its own platform.
  2. Stay in the vehicle, engine running, foot off the brake if the scale allows.
  3. Press the call button and give the attendant your truck number.
  4. Collect the ticket and pull forward clear of the platform.
  5. For a towable, weigh the truck alone on a second pass to calculate tongue or pin weight.
  6. Keep every ticket, the reweigh after you shift cargo is your proof the fix worked.

What the Ticket Does and Does Not Tell You

A platform scale reports weight per axle, not per tire. On a single-rear-wheel axle that is close enough for a first check. On a dual-rear-wheel motorhome or a wide trailer axle, the two sides can differ by hundreds of pounds, and the axle total hides it.

That is the gap most weighing guides skip. Axle totals get you 90% of the way; four-corner weighing, each wheel position on its own pad, closes the rest. Many owners start with a CAT Scale pass and only seek corner weights when a reading lands close to a limit or when one tire on an axle keeps wearing out early.

Reading Truck Scale Weight per Axle Against Your Ratings

Truck scale weight per axle only means something when you compare it to three numbers: the gross axle weight rating (GAWR) on your certification label, the tire load rating on each tire's sidewall, and the gross vehicle weight rating (GVWR). Stay under all three, and you have margin.

Use this quick check after every weighing:

Reading | Compare To | Where to Find It

Front axle weight | Front GAWR | Driver door jamb label

Rear axle weight | Rear GAWR | Driver door jamb label

Total weight | GVWR | Driver door jamb label

Per-tire load | Tire load index | Tire sidewall

If any single reading is over its limit, move weight before you move the rig. Shift cargo rearward or forward, drain a tank, or leave gear at home. If you need help reading load range and load index markings, our guide on RV tire load ratings and weight capacity walks through the sidewall step by step.

How to Distribute Weight on a Dual Axle Trailer

Knowing how to distribute weight on a dual axle trailer comes down to balance. Too much tongue weight overloads the truck's rear axle. Too little makes the trailer sway. Aim for a tongue weight that sits inside your hitch and tow vehicle limits, and confirm it with a separate pass on the scale.

  • Load heavy items over or slightly ahead of the trailer axles
  • Keep roughly 60% of cargo ahead of the axles, 40% behind
  • Weigh the truck alone, then hitched, to get true tongue weight
  • Recheck after every major loading change

Setting RV Tire Pressure by Axle Weight

RV tire pressure by axle weight beats the pressure printed on the sidewall. The sidewall number is the maximum the tire can hold, not what your rig needs. Use the tire maker's load and inflation table for your size, match it to your measured axle weight, then add a small safety margin.

Watch out: never run below the pressure the tire maker lists for your actual load, even if the ride feels softer. Underinflation builds heat, and heat is what kills RV tires. If you feel a vibration after setting pressures, on-site RV tire balancing in Columbus may be the next step.

Finding a Public Scale Around Columbus and the Outerbelt

Public scales cluster along the freight corridors, and central Ohio has plenty of them. You will find certified platforms at travel centers near I-70, I-71, and the I-270 outerbelt, plus commercial scales along the Rickenbacker and SR-317 freight corridor south of Obetz. Most charge a small fee per weigh, and a reweigh after adjusting your load usually costs less. Call ahead to confirm current fees and payment methods.

How to Vet a Scale Before You Drive Out

Not every truck scale is RV-friendly. Run this checklist when you call:

  • Platform length and count. You need enough separate pads to put each axle on its own, plus room for the whole rig to sit on the approach without blocking the lot.
  • Approach and exit clearance. Low-hanging canopies, tight turns, and steep ramps are the usual problems for a long motorhome or a truck-and-trailer combo.
  • Can you stay hitched? For a towable you want to weigh hitched first, so confirm the scale lets you pull through without unhooking in the lane.
  • Hours and staffing. Many are unattended overnight with a call box; others are staffed only on weekdays. Confirm someone can help if the ticket does not print.
  • Payment. Some take cards at the kiosk, some are cash or account only. Ask before you commit.
  • Reweigh policy. A reweigh within a short window after your first ticket is often cheaper. Ask what the window is.

Planning the Trip Around Columbus

The practical move is to load the rig at home, weigh on a weekday morning before the lots fill with semis, then adjust cargo and reweigh the same day.

Watch out: a scale that is fine for a pickup and a single-axle trailer may not have the pad spacing for a tag-axle motorhome. Measure your wheelbase and axle spacing before you go, and ask the attendant whether your configuration fits.

For a scale near you, search "CAT scale near me" and check the travel center listing, then call to confirm the details above.

Book Mobile RV Tire Service Where You Park

Weighing tells you what your tires are carrying. It does not fix uneven wear, mismatched tread depth, or a tire running near its limit. That is where we come in.

Many manufacturers recommend replacing tires in pairs on the same axle, with the new tires on the rear.

We bring mounting, balancing, and inspection to your campsite, driveway, or storage lot anywhere around Columbus, Obetz, Groveport, Canal Winchester, and Reynoldsburg, 24/7, including weekends and overnight. Balancing runs around $50 per tire.

Ready to act on your axle weights? Book mobile RV tire service or read how mobile RV tire service works in Columbus before you call.

Your axle readings are only useful if the tires carrying that load are healthy and correctly inflated.

Frequently Asked Questions

Can you weigh each axle of an RV separately at a truck scale?

Yes. On a multi-platform CAT scale you can park each axle group on its own pad and get a separate reading for the steer axle, drive axle, and trailer axles in one pass. If the scale is a single long platform, you weigh the whole rig first, then make additional passes with only one axle group on the pad at a time and subtract to find each load. Either way, ask the attendant before you start so you know the layout and where to stop.

How do you figure out weight per axle?

Start with the scale ticket that shows the load on each axle group. For a single-platform scale, weigh the complete rig, then reweigh with just the steer axle on the pad, then just the drive axle, and subtract the lighter readings from the full weight to isolate each group. Compare every number to the gross axle weight rating on the sticker inside the driver door or on the trailer frame. If any axle is over its rating, move cargo before your next trip.

How often should you weigh your RV?

Weigh the rig loaded for travel at the start of each season, and again any time you add a major item such as a full water tank, a generator, a second battery bank, or a new toy in the trailer. Many owners also reweigh after switching from a fifth wheel to a travel trailer or changing tow vehicles. A fresh ticket takes a few minutes and tells you whether your RV tire pressure by axle weight still matches the load you are actually carrying.

Does RV tire pressure depend on axle weight?

Yes. Tire makers publish load and inflation tables that show the minimum pressure a tire needs to carry a given load. Once you know your heaviest axle weight, divide by the number of tires on that axle, look up the pressure for that load in the table, and inflate to that figure or the RV manufacturer's recommendation, whichever is higher. Running too little pressure for the load builds heat and wears shoulders; too much pressure wears the center tread and stiffens the ride.

Ready for a new set? Elite Mobile Tire is open 24/7 and installs 2 or 4 new tires right in your driveway or parking lot anywhere around Columbus, Obetz, Groveport, Grove City, and Reynoldsburg. Financing is available through Afterpay and Acima with up to 24-month payment plans. Call 614-344-5010 or visit elitemobiletire.com to book.

Serving All of Columbus: We Come to You

We're fully mobile, so there's no shop to visit. Find your area below, and we'll bring the tire to your home, workplace, or the roadside.

Elite Mobile Tire - Brice, OH

Address

Brice, OH 43109
Monday
Open 24 hours
Tuesday
Open 24 hours
Wednesday
Open 24 hours
Thursday
Open 24 hours
Friday
Open 24 hours
Saturday
Open 24 hours
Sunday
Open 24 hours

Follow Us

Elite Mobile Tire - Etna, OH

Address

Etna, OH 43018
Monday
Open 24 hours
Tuesday
Open 24 hours
Wednesday
Open 24 hours
Thursday
Open 24 hours
Friday
Open 24 hours
Saturday
Open 24 hours
Sunday
Open 24 hours

Follow Us

Elite Mobile Tire - Obetz, OH

Address

Obetz, OH 43207
Monday
Open 24 hours
Tuesday
Open 24 hours
Wednesday
Open 24 hours
Thursday
Open 24 hours
Friday
Open 24 hours
Saturday
Open 24 hours
Sunday
Open 24 hours

Follow Us