Quick Summary
Axle weight ratings are the maximum loads each axle on your RV or trailer can safely carry, printed on the certification label near the driver's door or trailer coupler. Check the GAWR for each axle, since it sets the limit that matters most for tire safety. Compare the rating against your loaded weight to avoid overloading your tires.
- GAWR is the most weight one axle can carry and matters most for tire safety.
- The certification label is usually near the driver's door or trailer coupler.
- Overloaded tires can run hot, wear unevenly and are more likely to fail.
- A tire's load rating does not raise the axle's limit.
- Weigh your loaded RV at a scale and compare each axle to its GAWR.
Why Axle Weight Ratings Matter for RV Tire Safety
Every RV and trailer has a limit on how much weight each axle can carry. That limit is the axle weight rating.
Tires are built to carry a set amount of weight. When an axle carries more than its rating, the tires run hot, wear unevenly and can fail.
Here is why the numbers matter:
- Tire failure: Overloaded tires are more likely to blow out, especially in heat, so staying within axle weight ratings matters.
- Uneven wear: Tires on an overloaded axle can wear faster than the rest.
- Handling: An overloaded axle can make steering and braking harder to control.
Elite Mobile Tire checks all four tires on every RV job, not just the one that brought you in. If a tire on your RV needs replacing, our RV & camper tire service can handle it at your location.
Finding the Axle Label on Your RV or Trailer
Most RVs and trailers carry a label with their weight ratings. It is usually a sticker or metal plate placed in an easy-to-see spot.
Check these places first:
- The door frame or inside wall: Many RVs post the certification label near the driver's door.
- The trailer tongue or frame: Trailers often have a sticker near the coupler.
- The axle or hub area: Some axles have a tag with manufacturer information.
Stand beside the tire in daylight and look for a sticker on the frame near the axle.
Reading the Rating: GAWR, GVWR, and GCWR Explained
Weight ratings use a few acronyms, and they are easy to mix up. Here is what each one means and which one actually governs your tires:
- GAWR (Gross Axle Weight Rating): The most weight one axle can carry safely. It is usually listed per axle, front and rear, and sometimes per axle on a multi-axle trailer.
- GVWR (Gross Vehicle Weight Rating): The most weight the whole RV or trailer can weigh when fully loaded, including water, fuel, gear and passengers.
- GCWR (Gross Combined Weight Rating): The most weight a tow vehicle and trailer can weigh together.
Your GAWR is the number to watch for tire safety, since it sets the axle weight ratings that matter most for your tires. To see how RV tire load ratings and load index markings connect to those axle figures, read how to read RV tire load ratings and weight capacity. Your GVWR and GCWR cover the whole vehicle and what it pulls.
How to Read the Label Line by Line
A certification label is laid out in a predictable order. Read it top to bottom:
- Vehicle manufacturer and date of manufacture. Confirms the label belongs to your unit.
- GVWR. The ceiling for the whole loaded vehicle.
- GAWR front and GAWR rear. These are the axle limits, and they are the ones that matter most for tire load.
- Tire size and cold inflation pressure. This tells you what the manufacturer expects you to run, front and rear.
- Rim size. Confirms the wheel the tire is mounted on.
Read the GAWR for the axle you are checking, then compare it to the combined load rating of the two tires on that axle. If the tires together are rated higher than the axle, the axle still sets the limit. If the tires together are rated lower than the axle, the tires are your weak point and need to be upgraded or the load reduced.
Watch out: A tire's load rating and the axle's rating are not the same thing. A set of tires rated well above the GAWR does not raise the axle's limit, and running tires below the axle's needs is the more dangerous mistake.
What to Do When the Axle Label Is Missing or Unreadable
Sometimes the sticker is faded, damaged or gone, and the axle weight ratings are hard to read. Work through these steps in order:
- Check the owner's manual or the manufacturer's website using the VIN.
- Look for a second label inside a cabinet, on the frame rail, or near the trailer coupler.
- Find the axle identification number stamped or tagged on the axle tube, then contact the axle manufacturer with that number.
- Look at the tire sidewall for the load index and load range as a cross-check, not a substitute.
- Call a tire shop or service technician for help reading the axle and hub details.
If you cannot confirm the rating, do not guess. Call 614-344-5010 and we can help you check the tires on site.
The four weight ratings are easy to mix up, so here is what each one covers and which one governs your tires.
Rating | What it covers | Why it matters for tires
GAWR | Most weight one axle can carry | Sets the axle limit that matters most for tire load
GVWR | Whole RV or trailer, fully loaded | Ceiling for everything you carry, including water and gear
GCWR | Tow vehicle and trailer together | Covers the combined weight of the whole rig
Tire load rating | Most weight one tire can carry | Printed on the sidewall as load index and range
How to Tell Axle Weight Rating on a Trailer
Trailers follow the same basic steps for finding axle weight ratings. Before a fall trip, run through a trailer tire checklist for late-season towing. Start with the sticker on the frame, then look at the axle itself.
Use these clues to confirm the rating:
- Hub and lug count: The number of lugs on the hub can give a rough clue about the axle's size. It is not a substitute for the label.
- Axle tag: Some trailer axles have a manufacturer tag with a rated capacity.
- Trailer tag: The trailer's own label lists its GVWR, which helps you plan the load.
If you are towing a camper on US-23 or I-70 this fall, check the axle rating and tire condition before you leave. A quick check now can prevent a roadside problem later.
Using an RV Axle Weight Rating Calculator
A calculator helps you add up your load. It does not replace the axle weight ratings printed on the label.
To use one, gather these numbers:
- The GAWR for each axle
- The weight of your RV or trailer when empty
- The weight of everything you add, including water, fuel and gear
Add the loaded weights, then compare the total to each axle's GAWR. Keep a margin below the limit rather than running right at it.
How to Read RV Scale Results Against Your Ratings
A scale shows how much weight each axle actually carries when loaded. Public scales at many truck stops can weigh your RV or trailer. The ticket is only useful if you know how to read it against your GAWR.
Weighing Your RV or Trailer
Follow these steps:
- Load the RV or trailer the way you actually travel, including water, fuel, gear and passengers.
- Pull onto the scale so each axle sits on its own pad. On a multi-axle trailer, each axle should land on a separate pad.
- Weigh the full setup, then weigh the tow vehicle alone if you are towing, so you can separate tongue or hitch weight from axle weight.
- Ask for a weigh ticket that lists each axle separately, not just a total.
Reading the Weigh Ticket
A typical ticket lists a steer axle, a drive axle and trailer axles, each with its own weight. Read it like this:
- Steer axle weight compares to the front GAWR.
- Drive axle weight compares to the rear GAWR.
- Trailer axle weights compare to each trailer axle's GAWR.
- Gross weight compares to the GVWR.
Subtract each axle's actual weight from its GAWR to find the remaining capacity. Comparing the scale results to your axle weight ratings gives you that safety margin, and it is the figure to protect when you load.
A Worked Example
Say the rear GAWR on your label is 10,000 lb and the scale ticket shows the rear axle at 9,400 lb. You have 600 lb of remaining capacity on that axle.
Watch out: An axle total can look fine while one side is overloaded. If you can get a side-to-side or individual wheel weight, compare each side to half the GAWR.
Comparing Loaded Weights to Ratings
If an axle reads above its rating, lighten the load before you drive. Move heavy items forward or over the axles, drain tanks if you can, and re-weigh to confirm.
If you are heading out on I-71 or the I-270 outerbelt near Obetz, Groveport or Canal Winchester, a quick re-weigh before you leave is worth the stop. If a tire looks worn or low after weighing, call 614-344-5010 and we can check all four on site.
Get Your RV Tires Checked on Site Before the Next Trip
Before a long trip, have your tires checked. We're open 24/7, including weekends and overnight, and you can also get new RV or trailer tires installed at your home or work. If you're dealing with a sudden problem on the road, our same-day emergency flat repair can get you rolling again.
Tires on an axle are often replaced in pairs, with new tires placed on the rear. Many manufacturers recommend matching tread depth across tires, and checking the other tires matters as much as the one that looks worn.
We offer financing through Afterpay and Acima, with plans up to 24 months, so a full set is easier to fit into your budget. Balancing is around $50 per tire.
Ready to check your RV tires? Call 614-344-5010 or book at elitemobiletire.com.
Frequently Asked Questions
How do you tell the weight rating of an RV axle?
Look for the certification label, usually a metal or stamped sticker on the RV frame or axle tube near the wheel. Many RV and trailer axles list a GAWR, or gross axle weight rating, in pounds, such as 7,000 lb. Some labels are placed inside a wheel well or on the frame rail, so check both sides. If you cannot find a label, the axle's manufacturer or the RV's owner's manual is the next place to check. Do not guess from tire size alone, because tire load ratings and axle ratings are different numbers.
What does a 7,000-pound axle rating mean?
A 7,000-pound axle rating means the manufacturer has rated that axle to carry up to 7,000 pounds through the tires, wheels and axle combined when the weight is distributed across it. It is a per-axle limit, not a limit for the whole RV. An RV with two 7,000-pound axles could still be overloaded if its total weight exceeds its GVWR, even when each axle stays under its own rating. Keep loaded weight below both the axle rating and the GVWR.
Can an RV exceed its axle weight rating if its total weight is under GVWR?
Yes. An RV can be under its GVWR and still overload one axle if cargo, water tanks or the tongue weight sit toward the rear or front. Weight distribution matters as much as the total. Weigh each axle end separately at a public scale and compare each reading with that axle's GAWR. If one side or one axle is over its rating, shift cargo or water to rebalance before you travel.
Where can I find the axle rating on an RV or trailer?
Start with the certification or tire and loading label, which many RV makers place inside a cabinet, a door or the entry area. The axle label itself is usually on the axle tube or frame near each wheel. For trailers, check the VIN plate and the owner's manual for GAWR listings. If you still have questions, call a tire service that works on RVs and bring the axle model or the make and year of the unit so they can help you confirm the rating before you buy replacement tires.
Ready for a new set? Elite Mobile Tire is open 24/7 and installs 2 or 4 new tires right in your driveway or parking lot anywhere around Columbus, Obetz, Groveport, Grove City, and Reynoldsburg. Financing is available through Afterpay and Acima with up to 24-month payment plans. Call 614-344-5010 or visit elitemobiletire.com to book.




















































